
Add to Cart
Stainless Steel Screw Drum Screen Process For Textile Wastewater Treatment
Product Description
Solids dewatering screen screw screen for landfill disposal is a Screw Screen that consists of
a screen basket, a conveyor screw, and a compaction section. GE is almost identical with
GCP but misses the compaction section. It is suitable for applications where screenings may
not or cannot be compacted.
working principle
Screw screen to the horizontal equipment installed in the drains, the water from flowing into
the drum drum ends, the water flows through the grid gate slit, solid waste is filtered in the
grid baskets, cleaning arm with a finger in a circular motion when cleaning Grilling gap,
rake teeth extending into the grid, the solid was removed when the cleaning arm at the
highest point, by the action of water washing and slag plate, remove the garbage down from
the rake teeth, and fall into the garbage collection means a screw conveyor bucket, during
transport through the variable pitch action is dehydrated at the uppermost end of the
compression zone is squeezed, and squeezed the water is returned to the canal, and finally
into the garbage container or a successor device, and then processed.
Benefits
Throughput rates up to 1000 m³/h (589 cfm)
Screen mesh size ranging from 0.25 mm (0.01") to 10 mm (0.4")
Screen width ranging from 200 mm (8") to 700 mm (27½")
Stainless steel casing
Shaftless spiral screw in carbon steel or stainless steel
Intermittent operation
Variety of screen mesh sizes
Versatility: can be installed in a concrete channel on site or supplied with a self-supporting
container (supplied on request)
Volume reduction up to 50%
Absence of inside bearings
No mechanical components in contact with the product handled
Slow r.p.m.
Shaftless spiral, therefore no jamming or blocking even with fibrous products
Possibility of discharge into plastic bags
Long-life screw brushes
Low investment costs
Technical parameters
Model No. | Max. Flow Level | Ch. Width in/mm | Screen Basket Diam.in/mm | Grinder Model | Max. Flow Mgd/ l/s | Grinder HP/kw | Screw HP/KW |
S12 | 12”-60” | 14”-24” | 12” | - | 6.4 | - | 2 |
S16 | 18”-60” | 18”-28” | 16” | - | 9.7 | - | 2 |
S20 | 20”-60” | 22”-32” | 20” | - | 12.9 | - | 2 |
S24 | 24”-60” | 26”-36” | 24” | - | 15.7 | - | 2 |
S27 | 30”-60” | 32”-42” | 27” | - | 19.8 | - | 2 |
SL12 | 12”-60” | 14”-24” | 12” | TM500 | 3.5 | 3-5 | 2 |
SLT12 | 14”-60” | 18”-40” | 12” | TM1400 | 7.8 | 3-5 | 2 |
SLD16 | 18”-60” | 36”-60” | 16” | TM14000D | 13.5 | 5 | 2 |
SLX12 | 14”-60” | 22”-24” | 12” | TM1600 | 3.5 | 7.5-15 | 2 |
SLX16 | 18”-60” | 22”-28” | 16” | TM1600 | 5.6 | 7.5-15 | 2 |